My Mustang has a door Finally!!!

So last weekend Dad, Sean, and T attempted to install the driver's side door on the mustang again. this is are 5th time the door has been put on the door and the 17th time of adjusting and checking. It has been about 6 months since our last attempt at the door. We took apart one of our jacks to specially design it for the door, used a $40 special ordered wrench, use another jack, a block of wood, two bricks, socket wrench, a small screwdriver, 10 Popsicle sticks, a bunch of blue masking tape, three humans, 1-2 hours of just sitting there thinking how do we start, close to 3-4 hours of prep, and 1-2 hours of checking/rechecking/adjusting/freaking out/pleading with the heavens to find that the door is finally installed and lines up pretty much perfectly on the first try of sunday. :)

so after about 5-7 hours here it is:

with the door open


note: yes the door is a bit angled like a lambo scissor door which which is why the door fit a alot better this time

with the door closed



from the rear



to show the lines



and finally for those who think i'm pulling your leg here's the passenger side too

w

Stang update for Febuary/March

so these two months we were mostly working on the eletrical problems and changing fuilds and checking the engine.

this is a picture of the new and the old alternator fan/spacer/balancer (i think not sure exactly what its for)



this one is a picture of all the parts i restored excempt the alternator, bought it at kragen hehehe



here is a picture of all the parts reinstalled and ready to go and the fresh new battery shown has since been taken out and replaced as it was distroyed in the testing process of the eletrical system



here's a close up of the fan and alternator



this shows the exhaust manifold after i restored it to its original shade of cast iron

Stang in January

This is what the mustang looked like in january

The Dash



Driver side



Passenger side



Half Way Through The Install of The Front Seats
and after the Guages, Steering Colum, Steer Wheel, Dash Pad, Seat Belts (not the three points yet) installed



The Rear Seat
the second time i had to completely take it apart and reinstall it, i forgot to install the water sheild to the rear quarter panels



and this last one was just for fun
i like it, was trying to capture the late nights working on the stang :P

Stang updates

ok as some of you might have known i have/had a website build just for the mustang and i used it alot made quite a few sections of the website then i stopped using it and google changed the website so i'm going to be posting on here

the link to the website is click me.
the url is: http://sites.google.com/site/mrtpollard

so i said i'd post pictures a while ago but never got around to it so i'm going to split them into three posts one for january, one for feburay/ march and one for april.

so enjoy